I have 3 of the Veritas back saws now, and I’m starting to use them more frequently. Since I’m in between big projects, and storing the saws in the guestroom closet is less than ideal, I decided now was a good time to make a till. My requirements for the till are as follows:
- It needs to be big enough to hold my current nest of saws with room for one or two more.
- it has to be made with stock I have on-hand
With the requirements outlined, I started milling some 4/4 hard maple stock Sunday evening. The sides are a little less than 3/8″ thick, and bookmatched. All the other boards in the project are 5/8″ thick. I didn’t want any joinery showing on the side panels, so they are joined to the cross members with sliding dovetails. I’ll have more details next time.
Rough cut parts
Last time, I posted about the chisel racks I made for safety Week. Since then I’ve built the accessory racks that mount on the front sliding dovetails. I could babel on about them, but they are pretty simple, so I’ll let the photos do the talking.
Ahh, so pretty
mallet holder
scratch awl & marking gauge holders
Incra rules & squares rack
pencil and ruler holder
A few years ago Marc Spagnuolo came up with the concept of Safety Week, eventually one week a year, several prominent bloggers write about ways of staying safe in the shop. It’s not talked about much, but lets face it, woodworking is one of the more dangerous hobbies to get into. Careless mistakes in a woodworking shop, can easily lead to a missing digit, eye, or worse. Now I’m not known for being Mr. safety, some times I do stuff that would make most people cringe. One thing I take very seriously, is cuts caused by hand tools.
If you’ve done any amount of woodworking you’ve probably come to learn that hand tools make certain tasks very easy. You’ve also probably learned that the sharper they are the better. In the grand scheme of things planes and back saws aren’t that dangerous. Your chisels and marking knife however are just waiting for you to let your guard down so they can slice you open and send you to the emergency room for stitches.
With all that being said, I decided to make myself chisel racks for safety week (yea I know I’m behind schedule). The requirements were pretty simple, the racks needed to be cheap, simple, fully cover the blade, and if possible stylish. What I came up with is below, It’s made from black Willow that I piked up at my local Rockler dealer for $1.92 a BF. They mount to the wall with dovetails and they also have a dovetail across the front of them so I can make “attachments” to hold my marking gauge, rules, etc. The finish was BLO and paste wax.
Milled raw stock
Glued up
Mounted
lovely grain
Mounting dovetail
accessory dovetail
The weather is finally starting to turn here in central Illinois, and since I don’t have any major projects in the works, I worked on refurbishing this old block plane over the last few weeks. It’s a Stanley #102 type 2, so old is the keyword, because it’s at least 139 years old. I didn’t take a lot of photos during the refurb, but i did get the before and after photos below.
Before
After
While researching chisels earlier in the week,I came across an image that took me back to my childhood. My dad didn’t do much woodworking when I was little, but he had enough tools to take care of odd jobs around the house. Among his assortment of tools was a 4 piece set of Craftsman chisels. I use the term chisels loosely, because the handles were way to big, and they had horrible balance to boot. When I happened across the photo below it brought a smile to my face, as I flashed back to a time when I could barely get my hands around the handles, and would routinely pound them into a random 2×4 with a framing hammer. Before anyone asks; Yes I routinely got into trouble for misusing and misplacing my dads tools.
Craftsman butt chisels
