Lift-top box Construction

It’s always take me longer to get around to a post than I think it should, I should probably stop predicting when I’m going to post next. With that being said, I’ve finished some more lif-top boxes, and I even remembered to shoot some video this time. This is not my best recording job, but hey it was 45 degrees in the shop.

Crosscut Sled

The last shop project I needed to make, before I started my next “Real” project, was a small crosscut sled. I’ve found a small cross cut sled like with 2 runners, to be more precise, than high end miter gauges. Construction of a sled is pretty simple, so I didn’t go into a lot of detail in the video, but hopefully you will find it informative and entertaining.

An end grain cutting board

This is my 4th cutting board, and I knocked it out in 5 days, 7 if you count the 2 days I let the wood rest. This was a quick project by my standards, but it’s possible to finish even faster. The most time consuming part of making an end grain cutting board is the final flattening. Since it’s end grain, you Cannot (I can’t stress this enough) run it through a typical planer. Thus it pays dividends to make sure the final glue up is as perfect as possible.

In my opinion, there are two ways to safely flatten the board.  The first is with a drum sander,  and the second is with a router sled. The drum sander yields a finished board right off the machine, but it can’t take off much material per pass. Additionally it’s not a tool found in most home shops, but if you have one it’s the best option. A router sled can remove more material per pass, but it yields a finish that requires additional refinement with abrasives. It also make a huge mess, unless you have some extreme dust collection in your shop.

Links of interest:

1. Marc Spagnuolo’s podcast about making an end grain cutting board.
2. Marc’s podcast about finishing an end grain board.
3. CBdesigner is a free (love that word) program I use to design boards.

Examples from the video (CBdesigner files):

• Example 1
• Example 2
• Example 3
• Example 4
• Example 5

The shop tour

For the first time in a long time, I actually have a post ready to go when I thought I would. It’s been a long week, between finishing the assembly of my desktop & recording and editing video, but  that’s all done with now, and my first video post is ready to go. I had originally planed on starting a cutting board project, but since it was so hot last weekend, I thought an obligatory shop tour would be a better idea. I know I have lots of room for improvement, but I’m pretty happy with my first attempt.

An update and a preview of things to come

It’s been a few weeks since my last post, so it’s about time for an update. It’s been too hot (heat index approaching 110) the last several weeks to do anything meaningful in the shop, so I’ve been working on some new features for the site. Two new simple features are the links & contact pages. The final new feature  is a custom flash video player, that I wrote and can be see in action on this old post. The player is nothing great, but it’s significantly cleaner than the free one I used previously.

I recently purchased a new  Nikon P100 camera, to replace my ancient Cannon S1. Since the new camera takes both 720P & 1080P video, I’ve decided to start incorporating video posts into my blog. I’m psyched about this because I really enjoy posting about the trials & tribulations of my various projects, and then hearing back from people about how my post helped them with one of their projects. Additionally video opens a whole new realm of possibilities when it come to explaining something, because some things just can’t be adequately expressed with words & pictures alone. Now for the catch, my desktop died last week, and my laptop isn’t up to the task of processing video. I have parts for a new machine on order from Newegg, but it will probably be another week until I can get it built.  So check back in a week or so and I should have my first video post up.