<?xml version="1.0" encoding="UTF-8"?><!-- generator="WordPress/2.9.2" -->
<rss version="0.92">
<channel>
	<title>Dan&#039;s Hobbies</title>
	<link>http://www.dans-hobbies.com</link>
	<description>The things i do for fun.</description>
	<lastBuildDate>Tue, 09 Mar 2010 23:27:37 +0000</lastBuildDate>
	<docs>http://backend.userland.com/rss092</docs>
	<language>en</language>
	
	<item>
		<title>Router Table (Pt. 8)</title>
		<description><![CDATA[I finished the case late last week, and started working on the top late Saturday night. One of  the things I struggled with, was how to cut a hole in the back of the case for the dust port. I didn&#8217;t want to buy a hole saw that would most likely never be used [...]]]></description>
		<link>http://www.dans-hobbies.com/2010/03/09/router-table-pt-8/</link>
			</item>
	<item>
		<title>Awesome Safety Glasses</title>
		<description><![CDATA[PPE isn&#8217;t normally a topic I get all worked up about, but after using these glasses for almost a year, I can say these are by far the best pair I have ever owned. The lenses are large, and perfectly contoured to fit my head.
This is really beneficial for two reasons. One, because they are [...]]]></description>
		<link>http://www.dans-hobbies.com/2010/03/05/awesome-safty-glasses/</link>
			</item>
	<item>
		<title>Router Table (Pt. 7)</title>
		<description><![CDATA[I&#8217;m behind on getting updates on this project published, the following photos are from last weekend. While I didn&#8217;t get much accomplished, it&#8217;s starting to look like a router table. The two main things I got done where mounting the drawers, &#038; sizing of the on of switch mount. I did one thing I won&#8217;t [...]]]></description>
		<link>http://www.dans-hobbies.com/2010/03/01/router-table-pt-7/</link>
			</item>
	<item>
		<title>Olive wood marking knife</title>
		<description><![CDATA[Who says you can&#8217;t find great deals on eBay anymore!! This lovely marking knife only cost me $29 delivered to my door step. It&#8217;s 7&#8243; long by 1/2&#8243; in diameter at the finger grip, and made from genuine Middle-Eastern olive wood. The blade is made of O-1 tool steel that has been hardened, tempered, and [...]]]></description>
		<link>http://www.dans-hobbies.com/2010/02/18/olive-wood-marking-knife/</link>
			</item>
	<item>
		<title>Router Table (Pt. 6)</title>
		<description><![CDATA[Friday, I finished up the three bottom storage drawers. The drawer joinery, is another one of details that my design deviates significantly from Norms. For utility drawers like these, that aren&#8217;t going to see a lot of daily use I like to use  dado &#38; rabbet joints. They&#8217;re easy to make on the table [...]]]></description>
		<link>http://www.dans-hobbies.com/2010/02/14/router-table-pt-6/</link>
			</item>
</channel>
</rss>
